Two Component Polyether Polyols Chemical PU Adhesive Gule For Air Filter / Air Filters Material
1. Product introduction
Two-component polyurethane adhesive for machine
component proportion ratio is 100:25
2. Parameter table
| Two-component polyurethane adhesive for machine component proportion ratio is 100:25 |
| | Material-A | Material-B |
| Weight | Small barrel :25KG | 6.25KG |
| | Big barrel :50KG | 12.5KG |
| Physical nature | orange-red viscous liquid (color based on your request to configure) | brown-yellow liquid |
| viscosity | 800-1000MPa.S(25°C) | 25-50MPa.S(25°C) |
| density | 1.02g/ml | 1.02g/ml |
| package | Plastic bucket or Tin bucket | Plastic bucket ,Tin bucket, Plastic pots |
| storage | 1. Material-A and material-B can store up 3-6 months. |
| | 2. To appropriate indoor storage above 15°C |
3. Product characteristics
Material-A:Small barrel :25KGBig barrel :50KG
orange-red viscous liquid (color based on your request to configure)
4. Product principle
1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.
1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the material until
2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation
3.Material temperature controlled 24°C-28°C appropriate then you can start operation.
4. Must be clean before using the mould release agent (Note:
The new plastic mould can be wiped free)
5 .If A and B is not reaction please measuring A and B ratio.
6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal
5. Service
We are manufacturer
With 10 years of production experience
High efficiency.
Long working life.
Good anti-humidity performance
Special size available as you request
On-time delivery
Sample offered as request
Product Tags:
|
|
Orange Red Polyether Polyols Two Component Adhesive , Pu Construction Adhesive Images
|
